|
|
BRUNO OUT-SIDER III SCOOTER LIFT
|
The Out-Sider III® is simple to operate.
Just turn the key and move the control lever to the position
marked ARROW UP or ARROW DOWN. The unit automatically lifts
and lowers the scooter, as well as raising and lowering
the hold-tite lock-down mechanism.
The Out-Sider III can raise and store 3 or 4 wheel scooters
weighing up to 300 lbs., using a Class III hitch with a
2" receiver. The Out-Sider III system is fully automatic
and is superior to any other rear exterior lift. The unit
is powder coated and assembled with stainless steel fasteners
for long life. In addition to these features, a special
weight sensing device applies exactly the right amount of
pressure to the hold-tite device to secure the scooter.
Bruno's Out-Sider III features an ON-OFF key for greater
security, and an automatic emergency safety latch prevents
the platform from lowering. As a result, the Out-Sider III
gives you an easy to use, secure way to transport your scooter.
The Out-Sider III is powered by your vehicle's battery
and is delivered fully equipped, including a lighted license
plate holder, reflectors and a D.O.T. approved center brake
light for added safety. |
RETURN TO TOP
BRUNO CURB-SIDER
|
| Bruno's Curb-Sider can end the struggle
of trying to manually lift and store a scooter in your van
or minivan. The Bruno Curb-Sider was designed to fit most
types of vans, minivans, sport utility vehicles and pickups
with caps. Plus, the Curb-Sider can be adapted for use with
some types of power wheelchairs, increasing its versatility.
The Curb-Sider lift is electrically powered from the vehicle's
battery. Simply press a button on the hand-held controller,
and the Curb-Sider raises and lowers any scooter weighing
up to 200 lbs., effortlessly.
Bruno's Curb-Sider provides a unique 180 degree powered
rotation, which makes it possible to raise, lower and rotate
a fully assembled scooter on the curb, at the side of your
vehicle, or directly behind it. The Curb-Sider's rotation
feature allows it to stow scooters in vehicles with tailgates.
The lift arm can be folded vertically when not in use and
installation does not require any structural modifications
to your vehicle.
|
RETURN TO TOP
BRUNO SCOOTER LIFT JR.
|
| The Scooter-Lift Jr. lift is electrically
powered from the vehicle's battery. Simply press a button
on the controller and the Scooter-Lift Jr. raises and lowers
your scooter, effortlessly.
Bruno's Scooter-Lift Jr. can be adapted to operate in station
wagons and hatchbacks. This versatility can provide a significant
benefit when a new vehicle purchase is not in your budget.
Bruno's Scooter-Lift Jr. can end the struggle of manually
trying to lift and store a scooter in the trunk or hatch
opening of your vehicle. The Scooter-Lift Jr. gives you
the convenience you need to transport your scooter, and
the freedom to travel when and where you want to.
The Scooter-Lift Jr. was designed to help raise and store
three-wheeled scooters in most auto trunks, station wagons
or hatchbacks, as long as the opening is large enough to
accept the partially disassembled scooter and compact lift.
The Scooter-Lift Jr. is also available with the added option
of a spring-assist feature. This further reduces the effort
needed to raise and lower the lift arm before and after
use. |
RETURN TO TOP
|
|